Get a Quote
Home / Factory & Certifications

Manufacturing

Factory, certificates and test reports

Every document on this page is the original PDF, downloadable, with its reference number and issuing body. If a claim is not on this page, we do not make it.

Gamier Floor factory building with finished goods ready for loading
Gamier Floor production workshop with extrusion and coating lines

Documents

Reference numbers match the PDFs exactly, so a buyer or specifier can verify them directly with the issuing body.

DocumentIssued byReferenceStandardDateStatus
CE — Verification of ConformityICR Co., Ltd. (Korea)ICR/VC/HS241072CPR (EU) 305/2011 · EN 14041:2004+AC:200621 Oct 2024Valid to 20 Oct 2029
FloorScore® indoor air qualitySCS Global ServicesSCS-FS-08342SCS-EC10.3-2014 v4.1 · CDPH/EHLB v1.2-201720 Sep 2022Expired 30 Sep 2023 — renewal pending
Physical performance testSGS-CSTC, ShundeSDHL2102001868HIGB/T 34440-2017 · GB/T 24508-201710 Mar 2021Tested — see results below
Formaldehyde emissionSGS-CSTC, ShanghaiSHAMLC1921220901EN 717-1:200422 Nov 2019Not detected, LOD 0.080 mg/m³
Halogen content — PE foamSGS-CSTC, GuangzhouCANML2001926103EN 14582:20165 Mar 2020F / Cl / Br / I all not detected (<50 mg/kg)
Material compositionManufacturer declaration——22 Mar 2022PVC ≈30% · calcium carbonate ≈69% · additives ≈1%
Warranty statementManufacturer declaration——22 Mar 20224 mm: 15/20 y · 5 mm: 20/25 y — see Warranty

All links open the original PDF. Documents are listed as issued — nothing is re-typed or summarised away.

What the SGS physical test measured

Report SDHL2102001868HI, SGS-CSTC Shunde, sampled 1 Feb 2021, issued 10 Mar 2021 — SPC flooring.

PropertyResultRequirement
Wear resistanceVolume loss 1.8 mm³ → Grade TFv ≤ 2.0 mm³
Slip value (pendulum)21no pass/fail judgement in report
Locking strength — short edge5.35 kN/m≥ 1.5 kN/m
Locking strength — long edge4.93 kN/m≥ 1.5 kN/m
Dimensional stability+0.04% length / +0.05% width≤ 0.25%
Curling after heat / temperature warp0.10 mm / 0.05 mm—
Castor chair≥ 25,000 cycles, no visible damagePass
Stain resistanceAcetone, coffee, 25% NaOH, 30% H₂O₂, shoe polish — all passPass
Light fastnessGrey scale 4–5Pass
Mass per area8,240 g/m²—

Values as printed in the report; grades are Chinese national standards (GB/T), not EN 13329 AC classes.

What we do not claim

These are the statements buyers ask for most often, and we would rather say nothing than overstate:

  • No EN 13501-1 fire classification has been issued — do not specify Bfl-s1 or Cfl-s1 on our behalf.
  • No R-class (DIN 51130) slip rating has been issued; the only measured value is slip 21 by pendulum.
  • No impact-sound (ΔLw / IIC) test exists for our pads yet.
  • No EN 13329 AC3/AC4/AC5 wear class; the wear result is Grade T under GB/T 34440.
  • The FloorScore® certificate SCS-FS-08342 expired on 30 Sep 2023 and is shown for reference only.

If you need any of these for a tender, ask us — we can commission the test for a defined specification before you place a production order.

Original documents

First page of each PDF, click to open the full document.

CE verification of conformity ICR/VC/HS241072
SGS physical performance test report
SGS EN 717-1 formaldehyde report
SCS FloorScore certificate

Quality control points

Incoming material

Film, virgin PVC and calcium carbonate checked against specification.

In-line inspection

Thickness, wear layer, colour and locking profile measured per batch.

Final inspection

Visual, dimensional and packing check before container loading.

Traceability

Batch number linked to the production record and the shipping document.

Warehouse and container loading

Finished goods are palletised, stretch-wrapped and loaded under our own supervision — nothing leaves without a loading photo record.

Finished flooring cartons stacked in the warehouse
Container loading: pallets inside a 40HQ and stretch-wrapped pallet
Palletised finished goods ready for shipment

Factory grounds

Two production halls and a separate finished-goods warehouse.

Aerial view of the factory buildings and yard
SPC production line with board stacks

Inside the production line

Click-lock profiling line for SPC flooring
Extrusion line producing the SPC core
Twin-screw extruder and calibration unit
Boards on the cooling conveyor after extrusion
Automatic palletiser stacking finished planks
Workshop with overhead crane and extrusion lines

Two clips: short line overview (3 MB) and factory tour (17 MB). The 17 MB file only loads when clicked — compress or host on YouTube before a paid traffic campaign.

Need the document pack before a tender?

We send the full PDF set — certificates, test reports and the warranty statement — with the sample shipment.

Request a QuoteWhatsApp